Real Fiero Tech

Hey ericjon;

I am waiting for my new chip from Ryan at Sinister. It is in the mail. Ryan doesn't ship to Canada so I had to get it sent to a buddy in NY state and then he shipped it on to me. In transit so should be here any day.

OK so it just keeps getting funnier in a sad way..... After 15 years, I open up the ECM and low and behold..... no chip. Really, no chip.... So, that REALLY explains a lot about my issues... :twisted: On the hunt for a new ECM and/or chip. Think I found one in Eastern Canada so I can then ship down ...

Also one more question as I was guessing but I assumed the ECM A plug starts at the left side and B-D are over to the right? I checked a couple sensors to confirm where they came out from the ECM but I have searched and never actually seen which plugs are which. All makes sense from what I have been...

Wow thanks very much Fierowannabe. I will use these to figure out the EGR setup. Again, thanks. My current status of the wiring and troubleshooting. I believe I have everything wired correctly but I am still not getting the injectors to fire. I have confirmed the pink wire going to the injectors has...

Great feedback and thanks. Currently, the D3 and D9 both go to one pin in the harness I have so I will definitely do what you recommend on the injectors. I will go out tonight and map the plugs for all the top of the engine wiring harness so I know where everything goes as a starting point. My setup...

Good evening all; I have not been over here in quite a while. I had a member over on the other board mention that there was this board available to possibly help with some issues I have encountered in my build. Way back in 2017, I thought I was close to being done with the build and needed a few mor...

Thanks for the help folks. I think I am close...... :-D I ended up having a problem with the alternator. I have the '96 engine of course so the harness was set up with a '91-'93 harness set up for a '94-'95 engine that I had started with. I am now working out the alternator. I ended up needing a '96...

I found most of the wiring questions except for one plug that I think is the MAT sensor that goes into the intake tube. Plug looks right from the pics of the sensor I saw at the parts store anyway. Going with that until proven otherwise. I don't see any plugs for a MAP sensor in my conversion wiring...

All; Thanks for your previous help and support on my wandering toward a wiring conclusion. I have gone out and looked for a '96/'97 wiring harness I can start with for OBDII but I am coming up dry right now. With the target of getting this car back on the road some day soon, I have opted to put the ...

Thanks for the great feedback folks. I did contact Ryan and he can't do an OBDII harness but can probably help with a reflash. I heard that the II setup was only autos from OEM but I had read the info from quite a while ago so thought it might be more fully sorted now. That may have been a poor assu...

All; I have been on here a few times in the past looking for some info and been long enough that I forgot my userID and password..... I tried a search with various keywords to try to get more info before posting but I haven't been able to find the info I am looking for. The long story is below and I...