Real Fiero Tech

I appreciate the positive interest. I have replaced everything accept the pcv and the breather tube i will do that asap, I just replaced the coolant temp sensor today and since i got it running it starts out running at around 3k rpms and about 1 min. later it calms down to about 900 rmps, is this no...

I got it running and it sounds great, I just put the gas to the floor and kept on cranking it and a bunch of crap came out of the tailpipe that some mouse built up inside the tailpipe and once all that stuff came out the engine ran like it was new. What a relieve. thanks for all the positive info. :...

service engine light wont come on when started and it wont come on when you test for the codes any idea? 84 2.5 auto thanks

new used ecm replaced today and now i have fuel coming out of the injector but it still wont start up. I put a test light to the spark plug wire and grounded the other end and cranked it over and the test light blinked off and on. I put the test light to another plug wire and it blinked on a off I t...

i hooked a noid light from autozone to the injector solinoid and nothing lights up when i crack it over. I just picked up a new ecm i will plug it in and let u know what happens thanks.

hey smelly why dont you tell me where you live and ill come over and give you a hand.

Tach needle moves when cranking , new ignition switch, new fuel pump, new ignition module , new pick up coil, new fuel filter, fuses are good, car starts and runs with starting fluid. still no ref, sig. to injector solinoid. I have power to red wire to inj. solinoid, I do hear the fuel pump and smel...

hey ass if you dont have anything positive to say shut the f up. These are legit issues shit head!

in the second pic of the ignition module what pins are for the pick up coil 123456? aslo in the second pic. how do you get this pressed fit nut off the shaft so i can replace the pick up coil? is there a tool to pull it off like a steering wheel puller? and does the wires look correct as in the plac...

in the second pic of the ignition module what pins are for the pick up coil 123456? aslo in the second pic. how do you get this pressed fit nut off the shaft so i can replace the pick up coil? is there a tool to pull it off like a steering wheel puller? and does the wires look correct as in the plac...

i was looking at my haynes book and i noticed that the positive cable has 2 fusible links in it. It looks like the person that had the car before me replaced the positive cable with another cable that does not have the fusible links the car only has links at the starter A and B links should i replac...

I just replaced the ignition module today and found a crack in the plactic pickup coil, its showing the green winding wire inside the coil, what would happened if i started it in this condition could i fry somthing? The part is on order, how do you get the pickup coil free from the distributer? Also...

does anyone know what the distibutor looks like under the cap i took mine apart to replace the ignition module and i thought there was a black plastic part that slide on top of the shaf t under the rotor nob but im not sure and i cant seem to find it is there one or am i going crazy if you have a ex...

what would happen if i just grounded the blue wire to the block that goes to the injector solinoid and then started the car would the injector fire or does the ecm send a pulse to the blue wire?

84 duke, auto ive got pwr to red wire for the inj. solinoid but im not getting a reference signal to the injector . It wont turn on the injector to shoot the fuel in the tbi. Ive got spark and fuel but the injector wont turn on. New ignition switch all the fuses work. What would u check next? Does t...

Where would u start to figure out how to get power to the injector solinoid? I checked all the fuses with a test light and they are getting power when key is turned to run. Whats next? any thoughts. Does anyone live in cincinnati ohio that might be able to stop over with a 84 and help i would be wil...

inj 1 and inj 2 are for the v6 unless one of these is used for the 4 cylinder does anyone know? thanks

Will where is the injector fuse? is it the crank fuse? 3amp? or is the ecm ignition fuse 10amp? thanks

I tested the injector lead solinoid,with a noid tester and cranked it over, and theres no reference signal.Where is the Injector fuse? is it in the fuse box? what is it labeled? Does anyone have a clear wiring diagram that would show how the power goes to the injector leads? is there anyway to test ...

coming out of the injector