Real Fiero Tech

My 98 mitsubishi eclipse has a oil seal leak and im about to yank the engine out of it, But I have all the parts to a newly built L67, And was thinking about assembling it to go into my mitsubishi eclipse, So far here is all the things I plan on doing Keeping the stock stick shift transmission and g...

I would use the stock transmission that came with the 3.4, The th125s are horrible The gearing is maybe ok for a 3.4 dohc engine, But you will need to adapt the TV cable onto the throttle for it to shift properly, And your computer will have to be programed to disable the codes you will get with the...

yeah I wish the Rustolem went on sale LOLZ fiero owners want stuff under $20 bucks, But by god I will one day get a can of that stuff for half price, Maybe they have coupons on Old Europe fiero forum for homedepot.



HDR rulez They can help we can build it wooot!!!

This is a before pic as you can see the original paint job faded very bad and I pretty much gave up on the paint when my mom backed into it I should of posted the before pic first but here goes Before http://i932.photobucket.com/albums/ad169/86fieroEarl/SSPX0029.jpg After http://i932.photobucket.com...

more shots http://i932.photobucket.com/albums/ad169/86fieroEarl/SSPX0104.jpg http://i932.photobucket.com/albums/ad169/86fieroEarl/SSPX0105-1.jpg http://i932.photobucket.com/albums/ad169/86fieroEarl/SSPX0091.jpg before I did this I had to replace the front bumper and hood, A long time ago when I was ...

decided to spruce up my fiero that has been sitting in the garage for awhile, This paintjob was done with stuffs from homedepot racing, Rustolem and mineral spirits with some high den foam rollers, Still a work in progress and waiting on this coat to fully dry 3 or 4 days it will take, Then I will h...

looks like the damage miss the frame and only messed up the trunk area, That fiero is very salvagable, looking good so far and can't wait to see it finished

you can make it shine by adding about 4 coats of clear coat then wet sanding with 1000 grit sandpaper, At autozone they have the quarts of clearcoat, just get a aircompressor and a spray gun block off needed stuffs or if you can't get a aircompressor get the high den fiber rollers and roll it on aft...

read the entire build thread, And everything is coming along nice for you, Thanks for the idea about the cut trunk using a mustang door skin, I was brainstorming what I was going to use for mine. Anyway im doing basically the same thing your doing, I remember hearing someone say use 2 mufflers on th...

problem solved, It was the map sensor, I had the wiring off big time, All of these codes were caused from that small problem, now my car has 0 codes and runs perfect, Rayan programed my pcm to run flawless. If anyone is getting there computer programed for there l67 They should have rayan from sinis...

ok I must of had everything grounded wrong because when i regrounded everythng the problem went away, But now a new problem happens, Now im getting a code 300 mult miss fire detected, tommorrow i will swap o2 sensors since i have a brandnew one in the garage, the car idles good but kind of pops when...

I upgraded to a 2000 pcm out of a grandprix with a na engine, i did a new harness and started her up for the first time it started right up but after 2 mins it trys to stall then run likes crap, I have purchased a new maf sensor (still did not work) replaced the air filter (still did not work) check...

The biggest difference I can tell is from the supercharges on both the S1 has a smaller goofy looking one that has a huge plastic cover over it The height and what dark says will be the only way to tell without the supercharger attached. Anyway here's a pic of a s1 supercharged engine. http://upload...

Yeah, I will not beat on it for awhile, Its going to be a daily driver so I can put some time into the fiero, And the fiero needs alot of work body, interior and a new computer and wireharness (the 97 computer sucks for the gtp engine) Needless to say it's getting a overhaul, I been driving the fier...

Looked to be a corvette stingray at one time Now its a mess LOL

I still have the fiero and its doing good, But I want to do some work on it and its my only daily driver, So I need to get a secound car, I have always like the look of the 2nd gen eclipse (3rd gen is ugly) And found some deals on these cars, 1 is a 97 GST eclipse with a manual tranny and 90k miles ...

thats one clean install, Nice :thumbleft:

A 1811 code is a transmission code guys I should of stated line pressure for the transmission, I did not mean fuel line pressure I ment transmission line pressure.

If you go with OBD2 do not go with a 97, The 97 computer does not like to have it's line pressure increased (computer program) or it likes to throw a 1811 code, I find out this when it threw it and I went through all of that to replace the pressure control selonoid, I found this out when I put a sto...

Mine did that ticking sound crap when I had the stickshift and the spec(thought it was only me), The TO bearing was a special order from advance But never gave me any problems(because spec sent me a TO bearing for a GETRAG transmission instead of a izusu, PS if anyone needs a TO bearing for a GETRAG...