Real Fiero Tech

If I wanted to track or drag a car or build a dyno queen, the Fiero would be down at the bottom of the list of choices. At the track you'd miss out on an underrated platform. I have an E46 M3 Competition on Bilstein PSS10s and Hawk race brake pads. I have tracked it extensively. VIR, Road Atlanta, ...

Notice how social media and even Old Europe, noone is talking about the track day on the 1.5 mile course during the 40th. Why do you think that is? Cause it was lame. There were maybe about 10 Fieros/owners that were more track-oriented. The track had 5th-gen Toyota Supras as pace cars, which were ...

Another bot deleted.. I wonder why they like this thread so much

There are tons of them with the HFV6 and Ecotec pattern. As far as I know the 2006 Pontiac G6 GTP F40 is the only one that has the GM metric bell housing (60 deg V6, 3800, LS4, etc).

Any suggestions on where else to look other than car-part and the self-service yard listings? On car-part there are 3 in the US right now..

Who wants to part ways with that F40 they've been keeping around in their basement for "some day"?

Shaun41178(2) wrote: ↑Sat Jul 15, 2023 11:08 pm So apparently an ls4 turbo from pickardt performance dynod only 510 at the wheels

Oooooof

Don't those dyno under 300 whp stock/NA?

SappySE107 wrote: ↑Wed Jul 05, 2023 9:43 pmThis is my math alternative;)

This is the way.

draven wrote: ↑Tue Jun 27, 2023 12:03 pm Any change in unit cost from initial estimates?

Still in the same ballpark. The bill of materials is still evolving.

6061. I might switch to 7075 if I make another set to just to avoid having to use a steel insert for the LBJ. THATS HAWT! maybe I missed it, how do they compare to stock weight wise? Comparing the knuckle+steering arm+hub+LBJ the gain is 4 lbs per corner. The brakes obviously add weight as well but ...

Got the left side mounted today and tested the articulation. Found some minor interference to the lower control arm at full droop plus left steering with high caster angles, but that's easily fixable with some sanding, and I'll add a relief in the CAD. The real issue is my lower ball joint is sunk t...

Do you know anyone with an Allison in a working vehicle that you could install a CAN logger in for a bit? Just need a few conditions.. stopped, engine off. Start engine. Idle. Put in drive and stand on brake for a few seconds. Drive off at steady slow speed first gear. Then a gradual acceleration up...

Things are getting real... The first prototype billet uprights for the 88 Fiero have arrived. Feature highlights: Massive wheel bearing strength upgrade as well as stronger ball joints. Inexpensive 4 pot Brembos (Camaro6, C7, and C8 Corvette), 5x120 bolt pattern for wheels (BMW fitment with hubcentr...

My oil pressure drops during long left sweepers. 200tw tires, front splitter and a smallish rear wing. I overfill the pan on my LQ1 by about a quart. Oil pan is stock. Stock windage tray.

I didn't know it was happening until I reviewed some in-car video. Android tablet datalogger showing about 1.1G.

Check this tool out: https://github.com/wireviz/WireViz

I banned the bot. It definitely was based on ChatGPT or a similar LLM. They just fed it the content of the thread and it came up with the most likely response.

Something like this might work but you need to make a new lower ball joint boss and steering arm. Also the front sway bar end link on the 88 Fiero will interfere with the steering arm. After you solve those issues will the geometry be right? They aren't cheap parts to begin with so what are you savi...

SN95 has MacPherson strut front suspension. They are nothing like the Fiero front. Are you thinking of the Mustang II?

If you use the C5/C6 wheel bearing geometry, there is a Chrysler application bearing with the 4.5" pattern that bolts right on and even takes the same axle: 513089 (93-04 Intrepid). Is there an outer CV that works with Fiero axles? GM used 27 splines on the large pattern A-bodies and 33 spline...

If you use the C5/C6 wheel bearing geometry, there is a Chrysler application bearing with the 4.5" pattern that bolts right on and even takes the same axle: 513089 (93-04 Intrepid).