Search found 5482 matches
- Fri Jul 01, 2005 1:40 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Ok, Old Europe'ers. STOP GIVING WRONG REAR SWAY BAR INFO
- Replies: 34
- Views: 6018
... 1/3 vs 1/2. We need the anti-roll bars to make up extra spring-rate while cornering for the 1/6th of extra weight transfer we are generating laterally to prevent bottoming of the suspension. ... So if the front suspension was right at its limit of travel while braking at 1G.. then without swayb...
- Thu Jun 30, 2005 1:23 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Ok, Old Europe'ers. STOP GIVING WRONG REAR SWAY BAR INFO
- Replies: 34
- Views: 6018
- Wed Jun 29, 2005 3:43 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Can my life suck any more? Clutch problems
- Replies: 22
- Views: 5579
:cussing: now what have you gone and done?? There's quite a few things it could be. First of all, check the fluid level in the master cylinder reservoir up front. If its empty, well, it probably leaked out someplace; maybe on the line, maybe at the slave, and maybe at the master cylinder. If the flo...
- Wed Jun 29, 2005 2:33 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Ok, Old Europe'ers. STOP GIVING WRONG REAR SWAY BAR INFO
- Replies: 34
- Views: 6018
- Wed Jun 29, 2005 2:20 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Ok, Old Europe'ers. STOP GIVING WRONG REAR SWAY BAR INFO
- Replies: 34
- Views: 6018
- Sat Jun 25, 2005 10:51 pm
- Forum: Technical Conversations on Pontiac Fieros
- Topic: My N* Swap
- Replies: 382
- Views: 117385
To prevent overextension (if you can't find a better slave) you can put a mechanical stop bt that arm so it can't push the TOB far enough to either fall off the ledge on the input shaft or push the pressure plate fingers into the clutch disc. There just happens to be a bellhousing bolt in exactly th...
- Sat Jun 25, 2005 2:11 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: My N* Swap
- Replies: 382
- Views: 117385
- Mon Jun 20, 2005 12:25 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Car Chemistry Inserts
- Replies: 12
- Views: 2474
- Sun Jun 19, 2005 5:01 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: 3.4 vs N Star springs.
- Replies: 28
- Views: 7682
- Sun Jun 19, 2005 4:33 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Cam Cogs
- Replies: 60
- Views: 11653
- Sun Jun 19, 2005 2:27 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Cam Cogs
- Replies: 60
- Views: 11653
Adjusting timing by moving a tooth? That's like 20 crank degrees. Its too coarse of an adjustment. What year are those cam cogs? If they are 91-93 you have to use a gear puller to get them off once you get the center bolt out. They have lock rings pressed in to hold them in place. Otherwise they sho...
- Sat Jun 18, 2005 2:49 pm
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Cam Cogs
- Replies: 60
- Views: 11653
Nothing stopping you from turning over the engine to expose the other bolt. You don't have to get it to TDC when adjusting the timing with these cogs. You could just modify the timing belt cover otherwise. Cut off part of the main cover and attach it to the inspection covers so you can get to the wh...
- Sat Jun 18, 2005 3:28 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Cam Cogs
- Replies: 60
- Views: 11653
Why would it be hard to make something like this adjustable without removing the plenum and valve covers? Pull the inspection covers, loosen the three bolts holding the outer part of the cog to the inner part (which is tightened to the cam as stock), turn the inner part/cam using a wrench on the mid...
- Fri Jun 17, 2005 3:31 pm
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Cam Cogs
- Replies: 60
- Views: 11653
there are tons of options - but most always the answer to questions of why isn't something make is just this - money if its not profitable then the person has to take it apon themselves to do it as a hobby and hope enough people buy it so that they don't get screwed over. as for the cogs.. for 91-9...
- Fri Jun 17, 2005 2:04 am
- Forum: For Sale
- Topic: Donk Engine!!!
- Replies: 19
- Views: 3929
- Fri Jun 17, 2005 2:00 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: Cam Cogs
- Replies: 60
- Views: 11653
- Thu Jun 16, 2005 11:17 pm
- Forum: Technical Conversations on Pontiac Fieros
- Topic: How do I home brew coil overs?
- Replies: 20
- Views: 6312
- Sat Jun 11, 2005 12:55 am
- Forum: Motorsports
- Topic: Launching an Auto/ratchet
- Replies: 18
- Views: 4111
- Fri Jun 10, 2005 12:59 am
- Forum: Motorsports
- Topic: RFT Official 1/4 mile times
- Replies: 30
- Views: 7667
- Thu Jun 09, 2005 4:09 am
- Forum: Technical Conversations on Pontiac Fieros
- Topic: How do I get rid of massive push
- Replies: 14
- Views: 3371