Real Fiero Tech

Yes it is, And yes it does! It needs some tlc, like window and headlight motors are slow, missing e barke cable and A few other minor things But since I replaced everything in the fuel system it runs great and make 13-15 psi all day long, I like the car but have to many Fiero's as it is now... Serio...

Well Im looking to get like 2.5k together or apart, dont know if anyone thinks thats resonalbe...

So I have the Canadian Indy pace car (again) I have no need for the car and am willing to sell seperately the engine/turbo set up and car if someone is interested in either. if anyone is interested in either let me know And Ill give you the details. http://i244.photobucket.com/albums/gg37/mrsleeve91...

Im looking for a decent set of cables for my friends Indy and dont really want to spend 200+.
So if anyone has a ok set and are willing to part with them let me know.

Thanks, have a great day.

The 3.4 dohc stuff still avalible?

WOW! Ah, think anout finding a different car?

If your gonna save it I would cut it all off and sleeve a new rail or two in that sucker.

Good luck with that!

Gaskets to go. I was skeptical when I ordered them but the looked good and worked great.

So anyone want/ need a set of MLS head gaskets? Ordering some this week, $300 shipped.

Cause the mains were so bad Im just going to tear it all down and check everything.. :puke:

Hey everyone,

Im going to be ordering MLS head gaskests like this week and thought I would see if anyone on here would like/need a set.

Let me know. lead time is about 2 weeks and $300 a set.

:blah5:

:mumum: :mumum: :mumum: :mumum: :mumum: So bad news, engine failure. I put my new fuel rails in to make sure they didnt leak and well when I started the engine, knock, knock, knock.... Any one there??? :angry: I pulled the pan and the mains are whipped out and the rods have sever scoring. Guess its ...

Exactly, the the mount that comes off to support the tube also mounts to
the cradel with another motor mount. And its made of 3/8's 316 stainless
plate and bar stock.
I pretty sure I put up a pic of it....

Yes, its a W Body inter. shaft, I used a stock drivers mans axles and stock passenger w/auto just changed the end and bearing from a stock wbody axle. I have mocked up some axle hoops, 4... one on either end of the axle, much smaller and no need to compensate for much travel. Levi, Thats a very inte...

Yes, axles go POP, just hope it doesnt happen at freeway speeds. That will seriously damage the frame rails and cradel at least. Trust me Ill keep you all updated on new Getrag failures. i didnt get a chance to start on the new brace for the diff. But fuel rails are done. :thumbleft: http://i244.pho...

Yeah, I agree thay are really pricey but if you need one... And I think these are a little higher quality than the oem fiero one.
There are plenty of cheap knock offs of this on egay for 40-70 bucks fyi.

Thats a good point, Im hoping to not add or subtract any of the pre load. Just a straight bar or plate with several mounting places on the trans and block. Also thinking about adding a few of these... http://store.summitracing.com/partdetail.asp?autofilter=1&part=IEC%2D93130&N=700+115&au...

So I went to step up my inj. this weekend to the 42's and well, didnt like how the fuel rails came out.. Cause they hit the intake manifold and have a tendence to leak rondomly. (Cause the flimsy tabs I welded on.) So Im hoping to make some new ones this weekend and Ill have some more pics of that. ...

Its a Holset HX55 from a huge generator, like for a small train. I think that was the application because it was the only way you could get the water cooled center section. Can make 45lb of boost all day long. Thats what the local holset dealer assured me. I got it off egay used but it showed no sig...

Sorry no vids yet, Dont have / know anyone with a digital one.
The 4 bolts were easy, some hardened 440 stainless bar stock and a bridgeport w/ easy track. drilled and taped the extra holes in the block. ( I just coppied the desgin of the standard after market 350 4 bolt but used the 3.4 specs. )

All Im saying is there has to be the same force pushing on the 2nd cluster in the opposite direction as the way the diff comes out, right? ok Im done explaining myself. You have made a valid ponit and I will take it into considersation to make another brace. Ive helped friends with several different...

Yeah I get that, All im saying is that with every action (force) there is and equal and opposite reaction (force). So if there is enough force to push the diff out of the case on the bell housing side there has to be the same force pushing the 2nd gear cluster towards the drivers side. But cause the...