Real Fiero Tech

Oh BTW, thanks for the props :thumbleft:

I will use the frame to move my parts into it. A few years back a DUMB BITCH run int my car going in reverse while I was dead stop like 5 lenths behind her. :angry: I was on shock for 30 sec, couldnt relize how stupid the other driver was. So this will be the donor for my 3.4DOHC + all mods and perf...

Series8217 wrote: Give up? Heck no. Just ship them to a friend in the 'States and have them make the parts and keep some of the profits and send the rest back. The extra sales would likely make up for the drop in profit from each part..

2nd that!! :thumbleft:

stimpy wrote:Are you gonna have the kids nuts hanging off your rear view mirror like some fuzzy dice?

ROFL!!!!!!!!!!!!!!!!!!!!

Its not a 4th of july but cant beat the price... $375 http://www.centennialpr.net/webdrive/home/drexter/3a_3.jpg http://www.centennialpr.net/webdrive/home/drexter/8e_3.jpg http://www.centennialpr.net/webdrive/home/drexter/70_3.jpg http://www.centennialpr.net/webdrive/home/drexter/ac_3.jpg http://www...

Actually I read somewhere that the "GM drag ecotecs" are running with "buildt" automatics and they are holding quite well. Cant remember the model tho. :( A good point for the automatics is that you can press the brake while accelerating in the tree and will build bust right out ...

Im willing to help, I just acquire a 2m6 to fix my GT. I will have some left over parts if need them. THe reality is that if will be done we have to come with a good plan in terms of what engine to swap. Obviously needs to be cheap and powerful. So I vote for a boosted 3800 or ecotec, 4 speed 4.10 t...

I believe a wide band cant be used with the ecm. So, if I take the car to a dynoshop for tuning and they use and external wide band sensor for tune, then after the tune is completed it should work right even with the narrow band?

Still need the ecm #


DreX

They're doing a group buy on 60v6.... I think somebody said it doesn't work with the 3.4 ECM for some reason... http://60degreev6.com/showthread.php?t=34427 edit: I guess it might be because the ECM's under the hood or something... :cussing: DAMN :mumum: I was hoping to use that, it will save me a ...

I dont have any ecm codes or problems so far. The only "issue" is that if I floor the car I see the A/F gauge going way rich, I beleive shold be optimal to just reach the "fist rich led" in the gauge. I have a lot of mods that perhaps throw out the mix, maybe is the fuel system u...

I always wonder. How many mile per gallon a setup like that makes?!?! :scratch:


DreX

My bro told me about this product, is a Chip emulator. http://www.moates.net/product_info.php?products_id=57 It acts like a live chip enabling all the ecm capabilities to real time like a stand alone. It cuts the tunning time alot, like stand alones and piggy backs. Does some one has use it? I asked...

Oh BTW, how much will cost me someone to burn my chip? :scratch:


Thanks
DreX

Sounds like the deal Im looking for, 2 bad im at Florida.

Dang.

DreX

I will put an order over the week. Some1 cloned my checkcard and pull 1k of my bank account.

So basically im on hold even for a burger, sad.


Thanks for the help, perhaps in 2 weeks i can have some data.


DreX

Kohburn wrote:did you confirm that the ALDL connector is connected to the right ECM pins?

Yes I did, like 4 times to be sure.

DreX

Well, I tried this weekend and no luck. I used the 2 transistor ALDL cable and no data flowed to the pc. Used freescan, winaldl, and other 2 softwares.

I beleive I need the max232 cable type. Can sone one verify this?



Any help will be appreciated.


DreX

Using slow mem in a faster bus will cause luckup due the stress the memory will recive. I dont recomend that, but it may work, depends on how big is the diference. In the other hand faster memory will do just fine in a slower mobo. Its like driving a Fiero in traffic err... I mean a Ferrari in traff...

Also I noticed that your modem have firewall. If you had the default password on perhaps some kid changed your DNS port filter to not allow DNS traffic over. That will hold any port 53 request outside your firewall.


DreX

Still having problems?? If so try this, download the latest drivers for your NIC. Then delete the adapter, restart the pc. When the hardware wizard ask you for the drivers select the ones you downloaded. Then try browsing again. The DNS is registering fine over the lease the problem is on the client...