Page 1 of 1

Dyno tuning the setup

Posted: Thu Feb 08, 2018 10:41 am
by Shaun41178(2)
I got it street tuned and its ok to drive around. I got some dyno time scheduled.

Looking at 13-14 lbs for max boost. Then try it with a 30 shot. Gonna play with the timing to see how much that adds if any. Right now base timing is set to 8 degrees btdc

Give me your hp and tq guesses.

Turbo lx9 3.5 with ported heads and custom itb intake

Re: Dyno tuning the setup

Posted: Thu Feb 08, 2018 8:08 pm
by The Dark Side of Will
Those were... 215 stock?

400/440 at the wheels.

Re: Dyno tuning the setup

Posted: Fri Feb 09, 2018 10:06 am
by CincinnatiFiero
Why not put it into desktop dyno and just put those numbers as your sig.

My guess is 380/410.

Re: Dyno tuning the setup

Posted: Fri Feb 09, 2018 2:20 pm
by Shaun41178(2)
205 crank was factory hp rating

Re: Dyno tuning the setup

Posted: Fri Feb 09, 2018 6:07 pm
by Series8217
My guess is 392 whp / 412 ft lbs

Re: Dyno tuning the setup

Posted: Sat Feb 10, 2018 11:20 pm
by The Dark Side of Will
Shaun41178(2) wrote:
Thu Feb 08, 2018 10:41 am
I got some dyno time scheduled.
When is it scheduled?

Oh yeah... I wasn't thinking about the TPC intake... new guess: 440/440

Re: Dyno tuning the setup

Posted: Sun Feb 11, 2018 11:18 am
by Shaun41178(2)
I went fri. :)
20180209_101648_Film2.jpg
20180209_101648_Film2.jpg (210.24 KiB) Viewed 47 times

Re: Dyno tuning the setup

Posted: Mon Feb 12, 2018 12:16 am
by Shaun41178(2)
video

https://youtu.be/y0SMYdXNGHQ

chart. Potatoes gonna potate 530/437
123_1.jpeg
123_1.jpeg (234.37 KiB) Viewed 44 times

Re: Dyno tuning the setup

Posted: Mon Feb 12, 2018 7:20 am
by The Dark Side of Will
Dayum... I wasn't far off on the torque, but CRAZY top end. NICE!

Re: Dyno tuning the setup

Posted: Thu Feb 15, 2018 8:03 pm
by Shaun41178(2)

Re: Dyno tuning the setup

Posted: Fri Feb 16, 2018 9:34 am
by crzyone
Fuckn' A man, nice numbers! Your fiero would smoke my FD. Hoping to get around 450whp with mine, getting more docile in my old age.