WTB 91-96 3.4 DOHC lifter / cam follower

Sell your parts/cars here. Parts & Cars - not just for "partscars."

Moderator: crzyone

Post Reply
User avatar
Series8217
1988 Fiero Track Car
Posts: 5971
Joined: Thu Jun 02, 2005 9:47 pm
Location: Los Angeles, CA

WTB 91-96 3.4 DOHC lifter / cam follower

Post by Series8217 »

I need one 91-96 3.4 DOHC V6 lifter / cam follower for research purposes. Must be from a 91-96 motor. The 91-97 years had 35mm followers and the 97s were 33mm.

A cam carrier would also be useful if you have one.
User avatar
Shaun41178(2)
Posts: 8358
Joined: Fri Nov 19, 2004 7:12 pm
Location: Ben Phelps is an alleged scammer

Re: WTB 91-96 3.4 DOHC lifter / cam follower

Post by Shaun41178(2) »

I have a cam carrier not sure about the lifter but ill check. Just pay shipping
FieroPhrek working on that ls4 swap for 18 years and counting now. 18 years!!!!! LOL

530 whp is greater than 312
User avatar
Series8217
1988 Fiero Track Car
Posts: 5971
Joined: Thu Jun 02, 2005 9:47 pm
Location: Los Angeles, CA

Re: WTB 91-96 3.4 DOHC lifter / cam follower

Post by Series8217 »

Cool, let me know if you find any lifters. I'll take the cam carrier either way. Any chance you have the cam thrust plate that was bolted to the end of the cam carrier? I could use a few.
User avatar
Shaun41178(2)
Posts: 8358
Joined: Fri Nov 19, 2004 7:12 pm
Location: Ben Phelps is an alleged scammer

Re: WTB 91-96 3.4 DOHC lifter / cam follower

Post by Shaun41178(2) »

no lifters. I threw them all away.
WP_20160724_001.jpg
WP_20160724_001.jpg (156.78 KiB) Viewed 2968 times
Post Reply