Headlight motors

Real tech discussion on design, fabrication, testing, development of custom or adapted parts for Pontiac Fieros. Not questions about the power a CAI will give.

Moderators: The Dark Side of Will, Series8217

Post Reply
wolfheads
Posts: 7
Joined: Sun Feb 17, 2008 2:57 pm
Location: Florida
Contact:
Contact wolfheads

Headlight motors

Post by wolfheads »

I had recently rebuilt the acuator motors for my headlights on my '85 Fiero. Everything looked good after installing the bumpers and reassembly went smooth. The only thing that worries me is the positioning of the arm that connects to the headlight to raise and lower it AND the positioning of the part the arm connects to on the motor. Can someone show me a diagram or drawing that shows the positioning of these? I know, I should have drawn how they were positioned BEFORE taking it apart. When reconnecting the headlights and testing them, one went up when it should have went down and vise versa.
How do I set the idling on my '85 Fiero GT ?
Top
Post Reply

Return to “Technical Conversations on Pontiac Fieros”