Fiero heads and intake on 3100/3400
Moderators: The Dark Side of Will, Series8217
Fiero heads and intake on 3100/3400
I am not sure if this belongs here, RTF vs the World, or where.
I want to know why the hell people do this?
I was reading about this on Old Europe and it looks like MUCH more work and $ than installing a 3100/3400 and you end up with a less powerful, less efficient engine.
Anyone care to shed some light for me?
I want to know why the hell people do this?
I was reading about this on Old Europe and it looks like MUCH more work and $ than installing a 3100/3400 and you end up with a less powerful, less efficient engine.
Anyone care to shed some light for me?
-
- Posts: 2908
- Joined: Thu Dec 20, 2007 2:47 pm
- Location: Columbus, Ohio
Re: Fiero heads and intake on 3100/3400
My understanding was so they could run the fiero wiring, wiring is like the chupacabra on Old Europe, they all run and hide at the sound of its name. Fiero intake and heads allows you to retain the stock exhaust, stock fuel injection system, stock intake (airbox), etc. Which defeats the point of a 3100/3400, just do a 3.2 stroker or 3.4SFI and not spend the time for the 3400/3100.
Re: Fiero heads and intake on 3100/3400
That's was my thinking....why not just do a iron-head 3.4?
3400 with a '7730 swap...just can't be as expensive as having custom pushrods, machined guideplates, new pistons, etc...
3400 with a '7730 swap...just can't be as expensive as having custom pushrods, machined guideplates, new pistons, etc...
-
- Posts: 19
- Joined: Tue Jul 07, 2009 11:13 pm
Re: Fiero heads and intake on 3100/3400
why not just put a 350 in itGooch wrote:That's was my thinking....why not just do a iron-head 3.4?
3400 with a '7730 swap...just can't be as expensive as having custom pushrods, machined guideplates, new pistons, etc...
.Now theres 2 pontiackid86's? Check the post counts 2 diffrent people.
-
- Posts: 252
- Joined: Sun Dec 14, 2008 10:11 pm
Re: Fiero heads and intake on 3100/3400
Wrong again, I support the 3.8 swaps.pontaickid86 wrote:why not just put a 350 in itGooch wrote:That's was my thinking....why not just do a iron-head 3.4?
3400 with a '7730 swap...just can't be as expensive as having custom pushrods, machined guideplates, new pistons, etc...
-
- Posts: 19
- Joined: Tue Jul 07, 2009 11:13 pm
Re: Fiero heads and intake on 3100/3400
especialey when done write
.Now theres 2 pontiackid86's? Check the post counts 2 diffrent people.
-
- Posts: 48
- Joined: Tue Jun 02, 2009 1:01 pm
Re: Fiero heads and intake on 3100/3400
Wrong again dumbass, you like 3800 s/c swaps you fucking little ricer.
theres not that much of a diffrence the 3800 is a cast iron block very heave the sc does make a lot of noise but hell im 21 i like people to hear what i got.
-
- Posts: 19
- Joined: Tue Jul 07, 2009 11:13 pm
Re: Fiero heads and intake on 3100/3400
Big words fr a pssy who wnt fight meV ate V8Archie wrote:Wrong again dumbass, you like 3800 s/c swaps you fucking little ricer.theres not that much of a diffrence the 3800 is a cast iron block very heave the sc does make a lot of noise but hell im 21 i like people to hear what i got.
.Now theres 2 pontiackid86's? Check the post counts 2 diffrent people.
Re: Fiero heads and intake on 3100/3400
Will can you clean this up? Get PontiFag out of our serious discussion?