Fiero heads and intake on 3100/3400

Gooch · Post by **Gooch** » Fri Jul 10, 2009 9:18 am

I am not sure if this belongs here, RTF vs the World, or where.
I want to know why the hell people do this?
I was reading about this on Old Europe and it looks like MUCH more work and $ than installing a 3100/3400 and you end up with a less powerful, less efficient engine.
Anyone care to shed some light for me?

CincinnatiFiero · Post by **CincinnatiFiero** » Fri Jul 10, 2009 10:08 am

My understanding was so they could run the fiero wiring, wiring is like the chupacabra on Old Europe, they all run and hide at the sound of its name. Fiero intake and heads allows you to retain the stock exhaust, stock fuel injection system, stock intake (airbox), etc. Which defeats the point of a 3100/3400, just do a 3.2 stroker or 3.4SFI and not spend the time for the 3400/3100.

Gooch · Post by **Gooch** » Fri Jul 10, 2009 10:13 am

That's was my thinking....why not just do a iron-head 3.4?
3400 with a '7730 swap...just can't be as expensive as having custom pushrods, machined guideplates, new pistons, etc...

pontaickid86 · Post by **pontaickid86** » Fri Jul 10, 2009 7:45 pm

Gooch wrote:That's was my thinking....why not just do a iron-head 3.4?
3400 with a '7730 swap...just can't be as expensive as having custom pushrods, machined guideplates, new pistons, etc...

why not just put a 350 in it

pontiackid86 · Post by **pontiackid86** » Fri Jul 10, 2009 9:06 pm

pontaickid86 wrote:
Gooch wrote:That's was my thinking....why not just do a iron-head 3.4?
3400 with a '7730 swap...just can't be as expensive as having custom pushrods, machined guideplates, new pistons, etc...
why not just put a 350 in it

Wrong again, I support the 3.8 swaps.

pontaickid86 · Post by **pontaickid86** » Fri Jul 10, 2009 9:13 pm

especialey when done write

V ate Archie · Post by **V ate Archie** » Fri Jul 10, 2009 11:17 pm

Wrong again dumbass, you like 3800 s/c swaps you fucking little ricer.

theres not that much of a diffrence the 3800 is a cast iron block very heave the sc does make a lot of noise but hell im 21 i like people to hear what i got.

pontaickid86 · Post by **pontaickid86** » Sat Jul 11, 2009 12:01 am

V ate V8Archie wrote:Wrong again dumbass, you like 3800 s/c swaps you fucking little ricer.
theres not that much of a diffrence the 3800 is a cast iron block very heave the sc does make a lot of noise but hell im 21 i like people to hear what i got.

Big words fr a pssy who wnt fight me

Gooch · Post by **Gooch** » Sat Jul 11, 2009 9:24 pm

Will can you clean this up? Get PontiFag out of our serious discussion?

Real Fiero Tech

Fiero heads and intake on 3100/3400

Fiero heads and intake on 3100/3400

Re: Fiero heads and intake on 3100/3400

Re: Fiero heads and intake on 3100/3400

Re: Fiero heads and intake on 3100/3400

Re: Fiero heads and intake on 3100/3400

Re: Fiero heads and intake on 3100/3400

Re: Fiero heads and intake on 3100/3400

Re: Fiero heads and intake on 3100/3400

Re: Fiero heads and intake on 3100/3400