axial piston engine?
Moderator: ericjon262
-
- Posts: 2848
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
axial piston engine?
Just thought these were kinda neat and worth sharing.
http://youtu.be/uJSLDq7MkhQ
http://youtu.be/c19kn3drdFU
http://youtu.be/uJSLDq7MkhQ
http://youtu.be/c19kn3drdFU
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Peer Mediator
- Posts: 15637
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
Re: axial piston engine?
There are a LOT of alternative engine designs out there. If one really were "better" than the traditional, it would be in use... such is the pressure that emissions and fuel economy regulations place on auto manufacturers.
MANY MANY alternative designs (e.g. rotary valves) are conceived with unrecoverable fatal flaws that relegate them to the engine test stands of history.
Most of these flaws have to do with sealing (e.g. rotary valves)... most of the rest have to do with basic material properties. For example, axial piston engines--and there have been many--frequently have contact stresses on the swash plate which are so high that no mass-producible material can last very long in service.
Airplane engines are a different market... BUT, mainstream piston engine MFG's know where their place in the market is. Alternative designers can't beat mainstream piston manufacturers at the mainstream piston game, so they are trying to beat turbines at the turbine game using pistons... and that's just not going to happen.
MANY MANY alternative designs (e.g. rotary valves) are conceived with unrecoverable fatal flaws that relegate them to the engine test stands of history.
Most of these flaws have to do with sealing (e.g. rotary valves)... most of the rest have to do with basic material properties. For example, axial piston engines--and there have been many--frequently have contact stresses on the swash plate which are so high that no mass-producible material can last very long in service.
Airplane engines are a different market... BUT, mainstream piston engine MFG's know where their place in the market is. Alternative designers can't beat mainstream piston manufacturers at the mainstream piston game, so they are trying to beat turbines at the turbine game using pistons... and that's just not going to happen.
-
- Posts: 2848
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: axial piston engine?
I just thought it was cool. I agree that the material stresses would be insane. I always thought the rotary valves were cool, but wondered how you would make them seal.The Dark Side of Will wrote:There are a LOT of alternative engine designs out there. If one really were "better" than the traditional, it would be in use... such is the pressure that emissions and fuel economy regulations place on auto manufacturers.
MANY MANY alternative designs (e.g. rotary valves) are conceived with unrecoverable fatal flaws that relegate them to the engine test stands of history.
Most of these flaws have to do with sealing... most of the rest have to do with basic material properties. For example, axial piston engines--and there have been many--frequently have contact stresses on the swash plate which are so high that no mass-producible material can last very long in service.
Airplane engines are a different market... BUT, mainstream piston engine MFG's know where their place in the market is. Alternative designers can't beat mainstream piston manufacturers at the mainstream piston game, so they are trying to beat turbines at the turbine game using pistons... and that's just not going to happen.
here's another cool design.
http://www.kiss-engineering.com/Slide1.jpg
http://www.kiss-engineering.com/
http://www.google.com/patents/US20050076864
Last edited by ericjon262 on Sun Aug 24, 2014 8:05 pm, edited 1 time in total.
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
- crzyone
- JDM Power FTW
- Posts: 4654
- Joined: Wed Nov 17, 2004 12:40 am
- Location: Whitecourt, Alberta, Canada
Re: axial piston engine?
Out of the alternative engines I'm glad the Wankle made it to mass production.
-
- Posts: 2848
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: axial piston engine?
Those are some quirky little bastards. when they're good, they're awesome, when they're bad...crzyone wrote:Out of the alternative engines I'm glad the Wankle made it to mass production.
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
- crzyone
- JDM Power FTW
- Posts: 4654
- Joined: Wed Nov 17, 2004 12:40 am
- Location: Whitecourt, Alberta, Canada
Re: axial piston engine?
Took me a few minutes to find this. I remembered a show I watched a few years ago that showed a German WWII engine that had opposing cylinders.
http://en.wikipedia.org/wiki/Junkers_Jumo_205
I forgot it was a diesel. This is a pretty neat failed design. I imagine it would be much better suited in a power generating role.
http://en.wikipedia.org/wiki/Junkers_Jumo_205
I forgot it was a diesel. This is a pretty neat failed design. I imagine it would be much better suited in a power generating role.
- crzyone
- JDM Power FTW
- Posts: 4654
- Joined: Wed Nov 17, 2004 12:40 am
- Location: Whitecourt, Alberta, Canada
Re: axial piston engine?
ericjon262 wrote:Those are some quirky little bastards. when they're good, they're awesome, when they're bad...crzyone wrote:Out of the alternative engines I'm glad the Wankle made it to mass production.
Factory Mazda seals are fine for most stock setups, but as soon as you put that motor and a few turbos into a sports car guys are going to fuck with it. My engine now has Rotary Aviation apex seals which are damn near indestructible. My friend that rebuilds and races rotaries has yet to blow up an RA super seal motor. That includes 400whp endurance races lasting 8 hours.
-
- Posts: 2848
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: axial piston engine?
not really a failed design, Lookup "fairbanks-morse"crzyone wrote:Took me a few minutes to find this. I remembered a show I watched a few years ago that showed a German WWII engine that had opposing cylinders.
http://en.wikipedia.org/wiki/Junkers_Jumo_205
I forgot it was a diesel. This is a pretty neat failed design. I imagine it would be much better suited in a power generating role.
Lots of freight trains and tugboats use them.
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Peer Mediator
- Posts: 15637
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
Re: axial piston engine?
Also the Napier Deltic, which has 3 crankshafts geared to a common output. It's three of the Junkers engines arranged in a triangle.ericjon262 wrote:not really a failed design, Lookup "fairbanks-morse"crzyone wrote:Took me a few minutes to find this. I remembered a show I watched a few years ago that showed a German WWII engine that had opposing cylinders.
http://en.wikipedia.org/wiki/Junkers_Jumo_205
I forgot it was a diesel. This is a pretty neat failed design. I imagine it would be much better suited in a power generating role.
Lots of freight trains and tugboats use them.
https://en.wikipedia.org/wiki/Napier_Deltic
-
- Posts: 2848
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: axial piston engine?
that's a new one for me, pretty cool.The Dark Side of Will wrote:
Also the Napier Deltic, which has 3 crankshafts geared to a common output. It's three of the Junkers engines arranged in a triangle.
https://en.wikipedia.org/wiki/Napier_Deltic
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Peer Mediator
- Posts: 15637
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
Re: axial piston engine?
Another one in which the contact stresses are likely unworkable.ericjon262 wrote:I just thought it was cool. I agree that the material stresses would be insane. I always thought the rotary valves were cool, but wondered how you would make them seal.The Dark Side of Will wrote:There are a LOT of alternative engine designs out there. If one really were "better" than the traditional, it would be in use... such is the pressure that emissions and fuel economy regulations place on auto manufacturers.
MANY MANY alternative designs (e.g. rotary valves) are conceived with unrecoverable fatal flaws that relegate them to the engine test stands of history.
Most of these flaws have to do with sealing... most of the rest have to do with basic material properties. For example, axial piston engines--and there have been many--frequently have contact stresses on the swash plate which are so high that no mass-producible material can last very long in service.
Airplane engines are a different market... BUT, mainstream piston engine MFG's know where their place in the market is. Alternative designers can't beat mainstream piston manufacturers at the mainstream piston game, so they are trying to beat turbines at the turbine game using pistons... and that's just not going to happen.
here's another cool design.
http://www.kiss-engineering.com/Slide1.jpg
http://www.kiss-engineering.com/
http://www.google.com/patents/US20050076864
-
- Posts: 2848
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: axial piston engine?
I'd still like to see one in operation. they had a video up somewhere, it looked like it shook around really bad...
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."