youtube channels?
Moderator: ericjon262
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
youtube channels?
you guys have any favorite youtube channels for tech/fab/non BS stuff? I've got a few I really like, and I figured some of you might too. Care to share any of your favorites?
The Fabrication series, Mostly welding, but there are a bunch of other cool engineering type bits in there.
https://www.youtube.com/channel/UCcxlBL ... SSUkzZ2Jlg
Myfordboy, Homebrew metal casting and machine work, super cool, no BS very informative.
https://www.youtube.com/user/myfordboy
Richard Holdener, dyno videos and tests, lots of them. Mostly LSx V8's, but others drop in too.
https://www.youtube.com/channel/UC8uf_z ... -uRSx6XbnQ
Jeremy Fielding, This one is pretty new to me, but he does a ton of work with electric motors and tools. he also builds some neat projects as well. Fairly heavily focused on low cost DIY, but still maintaining high quality stuff.
https://www.youtube.com/channel/UC_SLth ... -dmsFgmJVg
Project farm, This guy does all sorts of product testing, some of it is pretty extreme, like JB welding a cylinder head on and running the engine until it pops off! there's also some cool videos of him running flathead briggs and stratton engines with an acrylic head.
https://www.youtube.com/channel/UC2rzsm ... -wuOg_p0Ng
The Fabrication series, Mostly welding, but there are a bunch of other cool engineering type bits in there.
https://www.youtube.com/channel/UCcxlBL ... SSUkzZ2Jlg
Myfordboy, Homebrew metal casting and machine work, super cool, no BS very informative.
https://www.youtube.com/user/myfordboy
Richard Holdener, dyno videos and tests, lots of them. Mostly LSx V8's, but others drop in too.
https://www.youtube.com/channel/UC8uf_z ... -uRSx6XbnQ
Jeremy Fielding, This one is pretty new to me, but he does a ton of work with electric motors and tools. he also builds some neat projects as well. Fairly heavily focused on low cost DIY, but still maintaining high quality stuff.
https://www.youtube.com/channel/UC_SLth ... -dmsFgmJVg
Project farm, This guy does all sorts of product testing, some of it is pretty extreme, like JB welding a cylinder head on and running the engine until it pops off! there's also some cool videos of him running flathead briggs and stratton engines with an acrylic head.
https://www.youtube.com/channel/UC2rzsm ... -wuOg_p0Ng
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Posts: 617
- Joined: Thu May 20, 2010 10:07 pm
- Location: Grand-Mère, QC
Re: youtube channels?
Adam Booth:
https://www.youtube.com/channel/UCw3UZn ... H3R6C3Gcng
Descended from a family of machinists; he shows videos of mostly machining work. I saw the type of dial indicator base he was using and bought one for myself too!
Dave Jones:
https://www.youtube.com/channel/UC2DjFE ... ZqWBigcVOQ
An experienced electronics guy, sometimes does introductory "classroom/whiteboard" videos. Goes on rants as he takes apart poorly-designed Chinesium products on camera.
https://www.youtube.com/channel/UCw3UZn ... H3R6C3Gcng
Descended from a family of machinists; he shows videos of mostly machining work. I saw the type of dial indicator base he was using and bought one for myself too!
Dave Jones:
https://www.youtube.com/channel/UC2DjFE ... ZqWBigcVOQ
An experienced electronics guy, sometimes does introductory "classroom/whiteboard" videos. Goes on rants as he takes apart poorly-designed Chinesium products on camera.
-
- Posts: 617
- Joined: Thu May 20, 2010 10:07 pm
- Location: Grand-Mère, QC
Re: youtube channels?
I've been watching Andre Simon of High Performance Academy lately (since I am in the tuning phase of my engine build). He makes videos about tuning engines.
https://www.youtube.com/channel/UCkH2fk ... 6-j6xrg_sQ
He seems to know what he's talking about.
https://www.youtube.com/channel/UCkH2fk ... 6-j6xrg_sQ
He seems to know what he's talking about.
- Shaun41178(2)
- Posts: 8558
- Joined: Fri Nov 19, 2004 7:12 pm
- Location: Ben Phelps is an alleged scammer
Re: youtube channels?
Yea I have watched some tuning videos by that Kiwi too. They are informative.
-
- Posts: 469
- Joined: Wed Aug 08, 2007 11:08 am
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: youtube channels?
This Old Tony is great! his sense of humor is entertaining, but not distracting from the information.Honest Don wrote: ↑Sat Mar 27, 2021 1:53 pm This Old Tony is pretty fun and informative.
https://www.youtube.com/c/ThisOldTony/videos
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: youtube channels?
so, not automotive or metal fab, but recently I started watching Sampson Boat Co, and the Rebuild of "Tally Ho", a sailing yacht built in 1910. it gives an interesting perspective on construction techniques for old wooden boats. Not sure how much of it would ever be applicable to my life, but I find it enjoyable to watch. also, "rebuild" is the understatement of the century here, they're practically building a new boat, with a few extra steps...
https://www.youtube.com/watch?v=4FhTu3a ... psonBoatCo
https://www.youtube.com/watch?v=4FhTu3a ... psonBoatCo
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Posts: 617
- Joined: Thu May 20, 2010 10:07 pm
- Location: Grand-Mère, QC
Re: youtube channels?
The guy could have simply built a boat from scratch; I guess having the old boat was basically to have a 3D set of plans and for historical reasons.
In terms of applicability to your life, I guess you could keep certain things in mind when you are looking for your next place to live...
Some houses are located next to a navigable body of water.
Others are surrounded by farming fields, and have enough area for a runway.
I am sort of having second thoughts about the house I'm buying that's in the city, but it is what it is. Trailers exist to bring projects out to where they can be used, and wings can be bolted on... though development would be a lot easier if you could do tests in your own backyard.
Thinking about it, I don't think I have an intrinsic preference for wheeled vehicles, it's just that typical houses are accessed via roads, and you need a car anyway. The automotive hobby is the vehicle hobby with the lowest barriers to entry, besides bicycles.
In terms of applicability to your life, I guess you could keep certain things in mind when you are looking for your next place to live...
Some houses are located next to a navigable body of water.
Others are surrounded by farming fields, and have enough area for a runway.
I am sort of having second thoughts about the house I'm buying that's in the city, but it is what it is. Trailers exist to bring projects out to where they can be used, and wings can be bolted on... though development would be a lot easier if you could do tests in your own backyard.
Thinking about it, I don't think I have an intrinsic preference for wheeled vehicles, it's just that typical houses are accessed via roads, and you need a car anyway. The automotive hobby is the vehicle hobby with the lowest barriers to entry, besides bicycles.
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: youtube channels?
I don't intend on building a boat or airplane anytime soon, but it is refreshing to see craftsmanship on this level. I think my favorite part is seeing the array of volunteers from all walks of life who have been inspired to come take part in his project. Honestly, had I known sooner, I would have tried to go check it out, he is very close to my current location.
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: youtube channels?
Two different project builds I've been watching in spare time:
guy is building an LS4 powered Triumph, it's a pretty cool, and includes a complete chassis build using a mix of off the shelf and fabricated parts.
https://www.youtube.com/playlist?list=P ... 6tkzvIsYxk
This guy drag races a 4.3 powered GMC Sonoma "Synoma" that he adapted a SBC Edlebrock Pro Flow intake manifold to.
https://www.youtube.com/c/turbov6
Both are interesting builds, and very outside of the box IMO.
guy is building an LS4 powered Triumph, it's a pretty cool, and includes a complete chassis build using a mix of off the shelf and fabricated parts.
https://www.youtube.com/playlist?list=P ... 6tkzvIsYxk
This guy drag races a 4.3 powered GMC Sonoma "Synoma" that he adapted a SBC Edlebrock Pro Flow intake manifold to.
https://www.youtube.com/c/turbov6
Both are interesting builds, and very outside of the box IMO.
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Posts: 617
- Joined: Thu May 20, 2010 10:07 pm
- Location: Grand-Mère, QC
Re: youtube channels?
Abom79 has become uninteresting to watch. He has now become a vehicle for product placement, so the videos have become him opening new tools sent to him by various companies.pmbrunelle wrote: ↑Mon Jun 15, 2020 8:42 am Adam Booth:
https://www.youtube.com/channel/UCw3UZn ... H3R6C3Gcng
Descended from a family of machinists; he shows videos of mostly machining work. I saw the type of dial indicator base he was using and bought one for myself too!
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: youtube channels?
I had watched a few of his videos, but never subscribed, I recently found out he is based in my hometown... small world, bummer to hear that his videos went downhill.pmbrunelle wrote: ↑Tue Jun 14, 2022 8:47 pmAbom79 has become uninteresting to watch. He has now become a vehicle for product placement, so the videos have become him opening new tools sent to him by various companies.pmbrunelle wrote: ↑Mon Jun 15, 2020 8:42 am Adam Booth:
https://www.youtube.com/channel/UCw3UZn ... H3R6C3Gcng
Descended from a family of machinists; he shows videos of mostly machining work. I saw the type of dial indicator base he was using and bought one for myself too!
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
- Series8217
- 1988 Fiero Track Car
- Posts: 6056
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
Re: youtube channels?
Bad Obsession Motorsport / Project Binky is amazing. Great fab work, great writing, great humor, ridiculous car. 9 years later they're almost done. Start at episode 1.
https://www.youtube.com/watch?v=7hCPODjJO7s
https://www.youtube.com/watch?v=7hCPODjJO7s
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: youtube channels?
I watched the first episode, and for sure will be watching more as time permits! thanks for sharing!Series8217 wrote: ↑Fri Oct 21, 2022 2:18 pm Bad Obsession Motorsport / Project Binky is amazing. Great fab work, great writing, great humor, ridiculous car. 9 years later they're almost done. Start at episode 1.
https://www.youtube.com/watch?v=7hCPODjJO7s
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: youtube channels?
the fab work on this one is quite impressive. I was a little apprehensive of "Mini" and "Celica" when I started watching, but this build is gold. I'm on episode 17 or so now, and can't wait to see the finished car. The chassis "jig" they built is incredible. the amount of planning that had to go into just that is insane!Series8217 wrote: ↑Fri Oct 21, 2022 2:18 pm Bad Obsession Motorsport / Project Binky is amazing. Great fab work, great writing, great humor, ridiculous car. 9 years later they're almost done. Start at episode 1.
https://www.youtube.com/watch?v=7hCPODjJO7s
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: youtube channels?
I'm hesitant to post this as a channel recommendation, but David Vizard's channel can have a ton of valuable information, however, almost every video he posts has a ton of rambling, and it can be a bit annoying. he always has a point to prove, but proves it with stories and hearsay more often than testing data, personally, I prefer hard testing data to stories.
https://www.youtube.com/@DavidVizard
https://www.youtube.com/@DavidVizard
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
-
- Posts: 2960
- Joined: Mon May 24, 2010 5:34 pm
- Location: Aiken, SC
Re: youtube channels?
not car related, but I find "The Fat Electrician" quite entertaining, mostly reviews military tech, and some military history.
https://www.youtube.com/@the_fat_electrician/about
https://www.youtube.com/@the_fat_electrician/about
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."