Ever wonder what 800 horse looks like?

Post by **eHoward** » Sun Mar 13, 2005 8:08 pm

setup:
LS block with a 87.2/GSR crankshaft
84mm Endyn pistons. 9.4:1 cr
Crower Billet rods
Exospeed open deck sleeves
B16 head with Supertech Valvetrain, GSR cams

Full Race Top Mount with 3.5 inch downpipe
PTE GTQ71mm .68ar turbo.
PTE 750hp core
3.5 inch exhaust [/img]

Shaun41178(2) · Post by **Shaun41178(2)** » Sun Mar 13, 2005 8:22 pm

No low end tq. A 4.9 would rape it no question

The Dark Side of Will · Sun Mar 13, 2005 8:29 pm

Can't see RPM on the dyno graph. How fast does it turn?

4point9 would so take it out of the hole...

Post by **eHoward** » Sun Mar 13, 2005 8:37 pm

RPMs are cut off. YOu could calculate it if you really felt like it.

I'm not so sure a 4.9 would take it out of the hole with some of the two step systems and slicks these guys are running.

The Dark Side of Will wrote:Can't see RPM on the dyno graph. How fast does it turn?

4point9 would so take it out of the hole...

Shaun41178(2) · Post by **Shaun41178(2)** » Sun Mar 13, 2005 8:59 pm

Fuck off howard. The 4.9 can neva lose outta da hole. 300 lb ft nigga!!!!

I mean thats 2.0 60' times with slicks. At least thats what the 4.9 guys are posting with their slips. No 1.8 is going to be able to get better then a 2.0 period!!

The Dark Side of Will · Sun Mar 13, 2005 9:37 pm

I think the guys like George Ryan or RockCrawl or PBJ who know what the fuck they're doing have gotten 1.7's on street tires. Damn autos with a 1st gear that can get them out of the 60 foot...

bryson · Post by **bryson** » Wed Mar 30, 2005 2:39 pm

...It's smiling