For Sale: 12"x2.5" coil over springs

Fast88Fiero · Post by **Fast88Fiero** » Mon Aug 29, 2005 2:01 am

I have for sale some 12"x2.5" coil over springs for sale. 2 are 325 lb/in rate and 2 are 350 lb/in rate. I used Honda coil over sleeves/perches for these and they worked great. The 12" spring was too tall for how low I wanted my car, so I switched to a 10" spring. The 325lb springs were used for 2 days and the 350's are new in box. I ended up with 2 sets because I'm stupid. Anyway, asking $65 shipped a pair for these. :thumbleft:

Aaron · Post by **Aaron** » Mon Aug 29, 2005 8:58 am

I am kind of uneducated in terms of suspension, and it isn't such a big deal to me, but I am looking to lower my Fiero by 1-1.5", and not doing it via cut springs. I have an 88GT 5-speed.

Now since your car is an 88 I assume these will work. How low did you want your car, farther than 1.5" lower than stock?

I'm trying to figure out if these are what I need here, any help by anyone is appreciated.

p8ntman442 · Post by **p8ntman442** » Wed Aug 31, 2005 7:18 pm

aaron buy them and cut them to length. :bootyshake:

Aaron · Post by **Aaron** » Wed Aug 31, 2005 7:21 pm

Aaron wrote:and not doing it via cut springs.

p8ntman442 · Post by **p8ntman442** » Thu Sep 01, 2005 9:58 am

[quote="p8ntman442"] :bootyshake: [/qoute]

hence the ass shake

The Dark Side of Will · Thu Sep 01, 2005 12:02 pm

Aaron, those are coil over springs, not lowering springs.
If you use them, you'll need to install adjustable spring perches as well.

Aaron · Post by **Aaron** » Thu Sep 01, 2005 12:50 pm

OK thx Will!

I am going to pass, I'd rather buy lowering springs and do it that way.

Doug Chase · Post by **Doug Chase** » Fri Sep 02, 2005 2:42 am

What brand are they?

Doug