I have a complete conversion kit for the 7x6" or H6054 headlight kit that uses a Projector style clear cut housing with a H4 6000K HID bulb kit.
Price is $170
This is a plug and play conversion kit for the Fiero, but will fit the following vehicles:
1984 - 1988 Pontiac Fiero
1985 - 1986 Ford Mustang SVO
1987 - 1995 Jeep Wrangler
1986 - 1991 Mazda RX7
1982 - 1993 Chevy S10
1989 - 1992 Ford Probe
1982 - 1985 Honda Civic
1981 - 1993 Toyota Supra
1979 - 1991 Honda Prelude
1984 - 1989 Nissan 240SX
1985 - 2001 Chevy Astro Van
1986 - 1989 Acura Integra
1984 - 1986 Nissan 300ZX
1990 - 1993 Mazda Pickup Truck
1979 - 1990 GMC Full Size Truck
Maybe more. Any vehicle that uses a 7" x 6" sealed beam housing.
HID Specifications:
SO 9001:2000,E-Mark
High and reliable quality digital ballast
Input voltage range: DC 9 - 18V
Rated voltage: 13.5V
Max. start voltage: 23kV
Input current: 3.2A
Output power: 35W
Working temperature: -40 ~ 105°C.
Switch time :>100000times
6000K Color
H4 High/Low Bulb
Kit contains:
2 x 7"x6" H6054 style non-sealed housings
2 x Black Box H4 High/Low HID Bulbs
2 x Black Box Digital Ballasts
2 x Secure Mounting Brackets
2 x Power Cables
6 x Zip ties
All necessary wires and install accessories for plug and play performance!
Tests that have been made before leaving factory:
6 hours continuous working aging test.
Connection circuit protection test.
Short circuit protection test.
Lack of voltage protection test.
over voltage protection test.
Flash light concussion test.
Quakeproof capability test.
Cold/Warm boot test.
Polarity protection test.
Here are some pictures of the actual product being sold:
Low Beam HID:
High Beam:
This kit is plug and play and ready to be installed immediately. The process for this modification is practically the same as replacing a headlight.
Price is $170. I can accept Paypal or Money Orders
Thanks!
7x6 H6054 Sealed Beam HID / Projector Conversion Kit
Moderator: crzyone
-
- Posts: 798
- Joined: Fri May 13, 2005 10:08 pm
- Location: Minnesota
- Contact:
- Series8217
- 1988 Fiero Track Car
- Posts: 5984
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
-
- Posts: 798
- Joined: Fri May 13, 2005 10:08 pm
- Location: Minnesota
- Contact:
- Series8217
- 1988 Fiero Track Car
- Posts: 5984
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
-
- Posts: 798
- Joined: Fri May 13, 2005 10:08 pm
- Location: Minnesota
- Contact:
No aftermarket HID lamp is DOT approved in the USA due to the lack of standardization, however it does have ISO 9001:2000, and E-Mark e24.Series8217 wrote:Are the housings, lenses, and lamps DOT approved?Chris-Nelson wrote:This mod is as legal as any other aftermarket headlight or tail light housing that you can get for any car.
Any pics of the beam pattern (pull up to a garage door or something)?
ISO 9001:2000 is an international standard for quality and the e mark is similar to our DOT rating, but for Europe.
I do not have these in a car, but I took a pic of them against a wall:
Halogen:
HID:
-
- Posts: 2908
- Joined: Thu Dec 20, 2007 2:47 pm
- Location: Columbus, Ohio
-
- Posts: 798
- Joined: Fri May 13, 2005 10:08 pm
- Location: Minnesota
- Contact:
-
- Posts: 2908
- Joined: Thu Dec 20, 2007 2:47 pm
- Location: Columbus, Ohio