I have parts for sale that came from a complete high-performance Chevrolet 350 SBC. This engine was professionally machined and assembled, but never run. It was a prize for a competition and is being parted out now. Here are pictures of this engine before it was taken apart:
Here are the parts listed for sale. If you have any questions, please send me an email or message here.
**Harland Sharp 1.5r Full Roller Aluminum Rocker Arms - $175
-8 Gold Anodized 3/8 stud rockers, Comes with 8 poly lock nuts
**Edelbrock #7501 Dual Plane RPM Airgap Intake Manifold - $170
-Comes with chrome thermostat housing, and chrome distributor clamp
**Edelbrock Aluminum Chrome Valve Covers - $55
-Tall design, comes with chrome T-Bolts and Chrome Breathers
**Trick Flow 195 Aluminum Cylinder Heads, Pair, Assembled with valves - $1,000
-195cc, 215 CFM Intake at 0.40 Lift, 26 pounds each, Capable of 500ft/lb tq and 450 hp; Comes assembled with springs, swirl polished valves, new retainers and guides. 45 degree angle valve job - 2.05 intake, 1.60 exhaust
For Sale - Chevy 350 SBC Performance Parts
Moderator: crzyone
-
- Posts: 798
- Joined: Fri May 13, 2005 10:08 pm
- Location: Minnesota
- Contact:
-
- Posts: 798
- Joined: Fri May 13, 2005 10:08 pm
- Location: Minnesota
- Contact:
350 Short Block: $1,000
Professionally assembled/Machined
Chevy 350 V8 Small Block
CNC Bored .030 Over
CNC Decked
9.018 Block Height
10.5:1 C/R
2 Bolt Main Caps - Perfect for splayed caps machining (Stronger than 4 bolt)
Forged Connecting Rods
Forged Aluminum Domed Ross Pistons
Speed-Pro Hydraulic Camshaft
Line Honed with Torque Plate
Edelbrock 2 Piece Timing Cover
Chrome Oil Pan
Chrome Oil Dipstick
Never run, only assembled
Comes with Engine Stand
Comes with NEW pushrods and lifters
Professionally assembled/Machined
Chevy 350 V8 Small Block
CNC Bored .030 Over
CNC Decked
9.018 Block Height
10.5:1 C/R
2 Bolt Main Caps - Perfect for splayed caps machining (Stronger than 4 bolt)
Forged Connecting Rods
Forged Aluminum Domed Ross Pistons
Speed-Pro Hydraulic Camshaft
Line Honed with Torque Plate
Edelbrock 2 Piece Timing Cover
Chrome Oil Pan
Chrome Oil Dipstick
Never run, only assembled
Comes with Engine Stand
Comes with NEW pushrods and lifters
-
- Peer Mediator
- Posts: 15633
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
-
- Posts: 798
- Joined: Fri May 13, 2005 10:08 pm
- Location: Minnesota
- Contact: