3.4 DOHC modified Valve covers
Posted: Tue Oct 12, 2010 7:26 pm
A pair of valve covers for the dohc motor. One has been modified with a aftermarket oil fil cap installed. Can show pics of what it looked like on the motor if one needs to. The screw down was tig welded to the valve cover, and the cap screws in with an o-ring seal to prevent leaking. This is a billet aluminum cap. its a nice piece. The oil cap was installed on the trunk side to make filling the oil after an oil change much easier.
Both valve covers are also the same which adds symmetry to the motor when installed instead of having two different valve covers.
$50 and shipping.
Both valve covers are also the same which adds symmetry to the motor when installed instead of having two different valve covers.
$50 and shipping.