need one to help swap cradles and also construct a dog bone mount down to the frame.
If anyone has one let me know..
WTB: LQ1 Front engine lift / dogbone strut bracket
Moderator: crzyone
- Series8217
- 1988 Fiero Track Car
- Posts: 5981
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
Re: WTB: LQ1 Front engine lift / dogbone strut bracket
That's the one that sandwiches between the timing cover and the head, next to the power steering pump?
Re: WTB: LQ1 Front engine lift / dogbone strut bracket
Negative, the other one on the rear of the block that sits close to the fiero firewall or the "stock" dogbone mount / engine lift in the W-bodies. My LQ1 doesn't have one and could use it to 1.) lift the block off the cradle while I swap in an 88 and 2.) I came across a dogbone mount on OE that goes from that lift/dogbone mount straight down to the frame to the right of the where the fuel fill cut into the frame.Series8217 wrote:That's the one that sandwiches between the timing cover and the head, next to the power steering pump?
Re: WTB: LQ1 Front engine lift / dogbone strut bracket
Late reply, but I have one. It's brand new, came off a GM crate engine. Make an offer, but keep in mind it's heavy so shipping will cost ya. I'll get a pick if you need me to.
Re: WTB: LQ1 Front engine lift / dogbone strut bracket
Sorry, just saw this reply, I picked one up from local speed shop Engineered.netAaron wrote:Late reply, but I have one. It's brand new, came off a GM crate engine. Make an offer, but keep in mind it's heavy so shipping will cost ya. I'll get a pick if you need me to.