Real Fiero Tech

I need to replace the stock v6 fuel lines on my 85 GT to make the stainless braided lines work for my 3800sc swap. I cut the oem lines too low and now I need to replace them.
I was trying to fit on the stainless braided trans sport lines for my 3800 swap and I cut the OEM lines below the rubber hosing down by the filter and that's way too short.
PLEASE let me know if you have a set to sell and send me an asking price and hopefully pics showing condition.
My email is mrlduet@yahoo.com

My zip is 11510
Please send me pics and asking prices.

Thank you guys !
Louis

Who'd you buy those lines from? Did he rip off my instructions? He stole my entire vendor page, so why not rip off the instructions also?

I don't have a pair of lines, but I'd build some out of AN stainless before replacing the stock setup.

I am not sure what you mean by ripping off your vendor page. There are many people selling. The braided trans sport fuel lines on Old Europe. Some people include the compression fittings already on. I may try to flare brake tubing and the steel tubing on my braided lines and connect them via flared fittings. I never had luck with compression fittings and instead of chancing a fuel leak, I am going to try to flare the ends and join them that way.

I have a set. But you would be looking at $50 to get them to you.

Thanks i did buy a set. On to the next problem. My tapping rockers/pushrods