Page 1 of 1
WTB 91-96 3.4 DOHC lifter / cam follower
Posted: Tue Jul 19, 2016 7:51 pm
by Series8217
I need one 91-96 3.4 DOHC V6 lifter / cam follower for research purposes. Must be from a 91-96 motor. The 91-97 years had 35mm followers and the 97s were 33mm.
A cam carrier would also be useful if you have one.
Re: WTB 91-96 3.4 DOHC lifter / cam follower
Posted: Wed Jul 20, 2016 4:37 am
by Shaun41178(2)
I have a cam carrier not sure about the lifter but ill check. Just pay shipping
Re: WTB 91-96 3.4 DOHC lifter / cam follower
Posted: Wed Jul 20, 2016 11:55 am
by Series8217
Cool, let me know if you find any lifters. I'll take the cam carrier either way. Any chance you have the cam thrust plate that was bolted to the end of the cam carrier? I could use a few.
Re: WTB 91-96 3.4 DOHC lifter / cam follower
Posted: Sun Jul 24, 2016 2:11 pm
by Shaun41178(2)
no lifters. I threw them all away.
- WP_20160724_001.jpg (156.78 KiB) Viewed 3035 times