~450lb/in. Front Springs for Cheap
Posted: Mon Oct 09, 2017 3:33 pm
Hey guys,
I figured I'd share some info while I wait for iracing to update. The combination of sage advice gained through this forum and track experience put me in the mind set that I needed stiffer springs up front for the LeMons car. A little math and some catalog searching and I figured out that a cut down spring from the front of a 4th gen Camaro should get us close. Initial reactions are quite good but I'll know for sure in two weeks after the race. The 450lb/in. number is based on a friend on the fender, ruler and 0.8 motion ratio. Hope this helps someone.
Sam
I figured I'd share some info while I wait for iracing to update. The combination of sage advice gained through this forum and track experience put me in the mind set that I needed stiffer springs up front for the LeMons car. A little math and some catalog searching and I figured out that a cut down spring from the front of a 4th gen Camaro should get us close. Initial reactions are quite good but I'll know for sure in two weeks after the race. The 450lb/in. number is based on a friend on the fender, ruler and 0.8 motion ratio. Hope this helps someone.
Sam