Which Axles Required for Swap from THM125 to 4T65?

Real tech discussion on design, fabrication, testing, development of custom or adapted parts for Pontiac Fieros. Not questions about the power a CAI will give.

Moderators: The Dark Side of Will, Series8217

Post Reply
User avatar
CaptainHindsight
Posts: 101
Joined: Tue May 11, 2021 3:29 pm
Location: Comaville/Chicago Area

Which Axles Required for Swap from THM125 to 4T65?

Post by CaptainHindsight »

Anyone know the axles required for a swap from a THM125 to a 4T65 transmission using the stock rotors and suspension for a 1985?

Driver side 4 speed manual axle on the passenger side and a driver side automatic Pontiac 6000 Left axle on the 4T60e driver side?

Easy enough to measure and check. Just asking anyone with previous experience.
Top
User avatar
CaptainHindsight
Posts: 101
Joined: Tue May 11, 2021 3:29 pm
Location: Comaville/Chicago Area

Re: Which Axles Required for Swap from THM125 to 4T65?

Post by CaptainHindsight »

Found this site right after I posted this question:

http://www.gmtuners.com/swap/axles.htm
Top
jelly2m81
Posts: 569
Joined: Mon Mar 19, 2007 2:13 am

Re: Which Axles Required for Swap from THM125 to 4T65?

Post by jelly2m81 »

For the Non-HD it is the Fiero Automatic drivers side in the Drivers side and a Fiero Manual Drivers side in the Passenger side.
Top
The Dark Side of Will
Peer Mediator
Posts: 15626
Joined: Wed Nov 24, 2004 11:13 pm
Location: In the darkness, where fear and knowing are one
Contact:
Contact The Dark Side of Will

Re: Which Axles Required for Swap from THM125 to 4T65?

Post by The Dark Side of Will »

Sounds easy enough. Welcome back!
Top
Post Reply

Return to “Technical Conversations on Pontiac Fieros”