Fiberglass Mods for the Fiero from Dietmar
Fiberglass Mods for the Fiero from Dietmar
I am selling the fiberglass pieces made by Dietmar here in Germany.
Here is a picture of the things he offers. A f355 front fascia, f348 front fascia, f360 rear fascia, side scoops, skirts and tail-light panels.
The f355 installed (Kolja Platins beautiful 87GT).
The f348 front fascia (the cap spoiler on the bottom of the nose is extra) and both scoops and skirts (Dietmars own car).
The f360 installed with large side vents and the rear light panel.
Another pic of the scoops and skirts (this is Jack Cookes car).
Another pic of the rear light panel.
Here is a project that Dietmar is now working on and it should be done sometime this summer (a f360 front fascia). This is only a photoshop pic. The final out come may be a little different.
Here is a picture of the things he offers. A f355 front fascia, f348 front fascia, f360 rear fascia, side scoops, skirts and tail-light panels.
The f355 installed (Kolja Platins beautiful 87GT).
The f348 front fascia (the cap spoiler on the bottom of the nose is extra) and both scoops and skirts (Dietmars own car).
The f360 installed with large side vents and the rear light panel.
Another pic of the scoops and skirts (this is Jack Cookes car).
Another pic of the rear light panel.
Here is a project that Dietmar is now working on and it should be done sometime this summer (a f360 front fascia). This is only a photoshop pic. The final out come may be a little different.
Last edited by Fiero1Fan on Sun May 14, 2006 2:32 pm, edited 1 time in total.
Re: Fiberglass Mods for the Fiero from Dietmar
Looks different when I brighten up the image...
I like the enzo/360 look of the darker image. :scratch:
sorta looks like a photoshop. :la:
Last edited by whipped on Sun May 14, 2006 2:31 pm, edited 1 time in total.
My fiero is aliiiive!!
Now for the prices. All prices are US Dollars.
Front fascias = $600 *
Rear fascia = $600
Side scoops = $360
Skirts = $300
Tail Light-panel = $320
*The price for the f360 front fascia is not yet known.
Shipping prices to the US.
All fascias = $480 ea. (shipped per sea container)
Scoops, skirts and tail light-panel = $50 ea. (shipped per German post)
For any other questions please contact me per PM or email (timo.penrod@pennet-it.com).
Front fascias = $600 *
Rear fascia = $600
Side scoops = $360
Skirts = $300
Tail Light-panel = $320
*The price for the f360 front fascia is not yet known.
Shipping prices to the US.
All fascias = $480 ea. (shipped per sea container)
Scoops, skirts and tail light-panel = $50 ea. (shipped per German post)
For any other questions please contact me per PM or email (timo.penrod@pennet-it.com).
The shipping has always been the problem because of the size. the shipping box messures 72"x32"x20". The only way I have found to ship them for less than $1300 per box is by sea container. The container holds 24 boxes at one time and lowers the costs to just under $500 per box. I am still looking and hoping to find a cheaper alternative.
On the gold Fiero you'll notice that he is also using the turbo window scoops from the Fiero store. The 3 pieces all together have a very beautiful curve that really looks good on the Fiero.
On my 88 I'll also be using the door and front fender rockers from the Stage 2 scoops that will give me a small drop towards the lower curve of front f355 nose that I'll be using.
On my 88 I'll also be using the door and front fender rockers from the Stage 2 scoops that will give me a small drop towards the lower curve of front f355 nose that I'll be using.
Re: Fiberglass Mods for the Fiero from Dietmar
think you are smokin something - maybe your monitor settings are off - looks the same just brighter to mewhipped wrote:
Looks different when I brighten up the image...
I like the enzo/360 look of the darker image. :scratch:
sorta looks like a photoshop. :la:
Re: Fiberglass Mods for the Fiero from Dietmar
Could be my crappy monitor, but it's at maximum brightness..... The dark pic looks like the "mouth" disappears, i.e. is really curved in. Where as the light pic looks like it's just flat and not curved in. If that makes any sense at all...Kohburn wrote:think you are smokin something - maybe your monitor settings are off - looks the same just brighter to mewhipped wrote:
Looks different when I brighten up the image...
I like the enzo/360 look of the darker image. :scratch:
sorta looks like a photoshop. :la:
...or... try darkening your monitor. :la:
My fiero is aliiiive!!
Can you build a raft? :scratch:Fiero1Fan wrote:The shipping has always been the problem because of the size. the shipping box messures 72"x32"x20". The only way I have found to ship them for less than $1300 per box is by sea container. The container holds 24 boxes at one time and lowers the costs to just under $500 per box. I am still looking and hoping to find a cheaper alternative.
My fiero is aliiiive!!
- Shaun41178(2)
- Posts: 8558
- Joined: Fri Nov 19, 2004 7:12 pm
- Location: Ben Phelps is an alleged scammer
- Series8217
- 1988 Fiero Track Car
- Posts: 6056
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
- Series8217
- 1988 Fiero Track Car
- Posts: 6056
- Joined: Thu Jun 02, 2005 9:47 pm
- Location: Los Angeles, CA
Give up? Heck no. Just ship them to a friend in the 'States and have them make the parts and keep some of the profits and send the rest back. The extra sales would likely make up for the drop in profit from each part..Fiero1Fan wrote:If you spent years perfecting your work would you just give up your molds?