Was going to go dry sump when i was still building a pushrod motor.
Bought this beauty off of Falconer Racing.....uh huh the guys who used to build those slick 750hp 2.5L v6 60 degree motors.
I dont want to use it on a DOHC. I have another route im going. The pan has internal baffles and is plumbed for 2 scavange lines. 1 AN fitting included....cause i stole one for my oil return line....
<put oil pan pic here>
Any questions let me know... Open to offers or trades as per usual.
FOR SALE: 60 degree V6 dry sump oil pan. Very cool.
Moderator: crzyone
FOR SALE: 60 degree V6 dry sump oil pan. Very cool.
Resident Import Elitist
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
-
- Posts: 16
- Joined: Thu Jun 09, 2005 4:51 pm
http://www.razorperformance.com/3stage.htm
Thats a schematic on a complete system
What you cant really see is the stock internal oil pump has been blocked off and now an external unit is used.
Thats a schematic on a complete system
What you cant really see is the stock internal oil pump has been blocked off and now an external unit is used.
Resident Import Elitist
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
-
- Posts: 16
- Joined: Thu Jun 09, 2005 4:51 pm
- Shaun41178(2)
- Posts: 8375
- Joined: Fri Nov 19, 2004 7:12 pm
- Location: Ben Phelps is an alleged scammer
-
- Posts: 16
- Joined: Thu Jun 09, 2005 4:51 pm
Ok....
Depending on where you shop, Ive been watching ebay for a while now.
3 Stage pump (next to new with drive and belt) 250ish
Oil res (depends on options like heater and if its SS or al) 60-250
various SS lines .....20-150
Oil filter adaptor (word is a SBC one will work fine (60ish)
Cooler if you want
DRY SUMP PAN for a SBC goes for 150-300 USD!!! And thats for a generic one.
Yeah I think its worth ALOT more than 50 bucks because its probably 1 of a few in exsistance that survived the years. But again, its only worth what someone will pay.
Shaun - At the very least im gonna run gen3 caps and fab up a girdle to fit under a modified dohc oil pan if the gen3 pan wont work. But thats on the other dohc, not the dohc coming from aaron.
Depending on where you shop, Ive been watching ebay for a while now.
3 Stage pump (next to new with drive and belt) 250ish
Oil res (depends on options like heater and if its SS or al) 60-250
various SS lines .....20-150
Oil filter adaptor (word is a SBC one will work fine (60ish)
Cooler if you want
DRY SUMP PAN for a SBC goes for 150-300 USD!!! And thats for a generic one.
Yeah I think its worth ALOT more than 50 bucks because its probably 1 of a few in exsistance that survived the years. But again, its only worth what someone will pay.
Shaun - At the very least im gonna run gen3 caps and fab up a girdle to fit under a modified dohc oil pan if the gen3 pan wont work. But thats on the other dohc, not the dohc coming from aaron.
Resident Import Elitist
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)
-------------------------
1991 Skyline GTR
(OO\ SKYLINE /OO)