Small updates. I decided to go with a fuel cell instead of using the stock tank with a surge tank. Bought a 20 gallon sumped and foam filled fuel cell which hould work as well as a surge tank as far as fuel starvation goes. I will have to cut a hole in the floor of the trunk but that isn't a big deal.
http://store.summitracing.com/partdetai ... toview=sku
The car being done before mine is just about complete, here are some pics of the process.
Cur a strip out of the rear fender to move the wheel well higher and push the body in. This kit was made to work on a GTS and a GTR so this is required to fit the kit over the gtr's wide fenders and allow clearance for the tires.
Take the wheel well and bend it up over the fender.
Seal the crap out of it
Rear all mounted and riveted into place
They have the front mounted. Only side skirts to go then it's my turn.
20-30mm wheel spacers needed depending on your rim size and offset. My 18x9.5" rims will likely need a 20mm spacer, we'll see.
I will be having them glass ofer the gas filler door, I won't need it with the fuel cell and it will make it much cleaner.
In the end I should end up with this.
For those of you that know a thing or 2 about suspension setups. How will a 20mm spacer affect handling? By that I mean will it affect roll center?
I imagine it won't affect it much but it's been on the back of my mind. This will be my race car afterall.