My new obsession for the week.
Moderator: crzyone
LS6 block sounds nice, but without the rest of the LS6 stuff...hehe.BC2002SS wrote:Aaron do you have any pics of the engine, engine compartment. mostly of the passenger side head at the front, trying to find out if it has the ls6 block that some had
Here's the closest I have, I can get closeups over Thxgiving:
88GT 3.4 DOHC Turbo
Gooch wrote:Way to go douche. You are like a one-man, fiero-destroying machine.
-
- Peer Mediator
- Posts: 15629
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
only sure way to tell is to get the numbers off the block aganist the firewall on the drivers side
2002 Camaro SS
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
different stronger alloy and larger holes in the main webs in the block and better oiling. looking for pics to help identify ls1
number 12561168 is the ls6 casting number
number 12561168 is the ls6 casting number
2002 Camaro SS
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
quick check to find out if you need to look further, is to look here.
look for the two bullseyes as seen here.
if you have them it's an LS1 stop looking if it looks like this it might be an LS6 check the numbers on the back of the block on the drivers side.
look for the two bullseyes as seen here.
if you have them it's an LS1 stop looking if it looks like this it might be an LS6 check the numbers on the back of the block on the drivers side.
2002 Camaro SS
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
-
- Peer Mediator
- Posts: 15629
- Joined: Wed Nov 24, 2004 11:13 pm
- Location: In the darkness, where fear and knowing are one
- Contact:
What's the alloy difference?BC2002SS wrote:different stronger alloy and larger holes in the main webs in the block and better oiling. looking for pics to help identify ls1
number 12561168 is the ls6 casting number
The bay-to-bay breathing windows went from being machined in to being cast in place. These are important to power... they're worth over 25 hp on a Northstar.
not positive of the differences will try to find some of that stuff it was a long time sense this was talked about on the camaro sites. I do remember it had something to do with the Mexican plant that the LS6 was cast in
2002 Camaro SS
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
found this so far
http://www.idavette.net/hib/ls6/page3.htm
http://www.idavette.net/hib/ls6/page3.htm
2002 Camaro SS
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50
1986 Fiero GT 3800SC 4T65E-HD
slp 1.8 rockers, slp headers, northstar throttle body, Z06 MAF,3.3" pulley,160 drilled stat,
12" Corvette brakes
1.81 60' 13.004 @102
new best 1.939 60' 12.909 @ 104.50