wiring for a tpi 350 options
Posted: Mon Mar 31, 2008 6:03 pm
ok im making my 86gt with 350 (no flame wars) into an injected 350 from a camaro. any options on the wire harness?
Page 1 of 1
Posted: Mon Mar 31, 2008 6:10 pm
You won't find anything that's plug/play with a Fiero chassis. Your best bet is probably a universal harness from a company like Painless, which you would then modify to interface with the Fiero.
Posted: Mon Mar 31, 2008 6:36 pm
I like the method of just getting 90% of the camaro harness, and giving the right bits power and ground, and retaining the ECU to motor connections like they come stock. There will be some of the body connectors from the camaro that you wont use, but its not a huge deal to cut them out.
Posted: Mon Mar 31, 2008 6:42 pm
Cut wires have no place in a functional harness.
There are also chassis connections like tach, back up lights, VSS etc that go through the C500 connector.
There are also chassis connections like tach, back up lights, VSS etc that go through the C500 connector.
Posted: Mon Mar 31, 2008 8:55 pm
You have a harness yet? I have a complete TPI harness here for a friend thats for sale. It is the speed density style harness.
He had it here so I could modify the harness to work in a Fiero, but I easily convinced him not to go L98.....
He had it here so I could modify the harness to work in a Fiero, but I easily convinced him not to go L98.....
Posted: Mon Mar 31, 2008 8:59 pm
Just take an L98 sell the TPI and swap on a Holley Stealth Ram... You'll only be out a couple of hundred $ and you'll have 50 more HP. The L98 longblock isn't that bad.
Posted: Mon Mar 31, 2008 9:09 pm
have you modified the harness to work with a fiero? or will there still be work needed to be done..jelly2m8 wrote:You have a harness yet? I have a complete TPI harness here for a friend thats for sale. It is the speed density style harness.
He had it here so I could modify the harness to work in a Fiero, but I easily convinced him not to go L98.....
Posted: Mon Mar 31, 2008 9:13 pm
never found a steath ram for saleThe Dark Side of Will wrote:Just take an L98 sell the TPI and swap on a Holley Stealth Ram... You'll only be out a couple of hundred $ and you'll have 50 more HP. The L98 longblock isn't that bad.
Posted: Mon Mar 31, 2008 9:33 pm
Nope, nothing changed on the harness, it is uncut and complete.F8I6EgRtO wrote:
have you modified the harness to work with a fiero? or will there still be work needed to be done..
Posted: Mon Mar 31, 2008 9:36 pm
what would you want for the harness. and what would you charge to have it modified?jelly2m8 wrote:Nope, nothing changed on the harness, it is uncut and complete.F8I6EgRtO wrote:
have you modified the harness to work with a fiero? or will there still be work needed to be done..
Posted: Sat Apr 12, 2008 7:08 am
ok ive gotten a harness from the origional engine. still looking for advice on computer and on harness aptions here.