For those with auto trannies

Shaun41178(2) · Post by **Shaun41178(2)** » Sat Jun 03, 2006 2:26 pm

I am not sure but I think I already posted this here before. For those with autos and looking for a bit more kick here you go. High stall TQ C. If I had an auto still I would prob spring for this if the motor was coming out anyways. I think Protorque charges around $350 or did back like 6 years ago when I was still running my auto setup

http://cgi.ebay.com/ebaymotors/Cavalier ... dZViewItem

product1620 · Post by **product1620** » Sat Jun 03, 2006 7:32 pm

I asked about these before, and everyone said that it wasn't a good idea to use them (too high of a stall).

p8ntman442 · Post by **p8ntman442** » Sun Jun 04, 2006 8:40 am

if your running an auto and dont have the 4t60e i cant help, but if you are, pull the valve body down, And remove the large ball bearing. Reinstall the valve body. Good to go. Firmer shifts.